To cite this paper use one of the standards below:
FOAM-MAT DRYING OF TUCUPI WITH JAMBU: MATHEMATICAL MODELING, PHYSICAL AND CHEMICAL CHARACTERISTICS AND STABILITY DURING STORAGE
Thamirys Lorranne Santos Lima
Instituto Federal de Educação, Ciência e Tecnologia do Rio Grande do Norte- Campus Pau dos Ferros
Now you could share with me your questions, observations and congratulations
Create a topicTucupi and jambu are highly appreciated due to their sensory and exotic characteristics. However, their high water content makes these products perishable. Thus, the objective was to produce tucupi with jambu powder through foam-mat drying, characterize the obtained products and evaluate the stability of the powder during storage. Tucupi and jambu (10:1 m/m) were homogenized in a mixer with foaming agents until obtaining a stable foam, which was dehydrated at 30, 40, 50 and 60 °C until reaching constant mass. Subsequently, they were disintegrated and characterized for chemical and physical parameters, and the best powder was stored for 30 days at 5, 25 and 45 °C, with analysis every 10 days. Increase in temperature reduced dehydration times, due to the increase in drying rates and effective diffusivity of the process, which showed dependence on temperature, being described by the Arrhenius equation with activation energy of 36.75 kJ mol-1. The thermodynamic properties indicated that the process was endothermic. The powders showed good flowability characteristics, and the parameters wettability, hygroscopicity, total solids, total chlorophyll, total carotenoids, total titratable acidity (TTA), total soluble solids (TSS) were increased with increasing drying temperature, while moisture content and TSS/TTA ratio were reduced. During storage, there was an increase in moisture content and solubility, while TTA and TSS decreased and pH remained stable. Storage at higher temperatures accelerated water adsorption, intensifying degradation reactions, and moisture content was the most unstable parameter. According to the results, it is viable to produce tucupi with jambu powder by foam-mat drying, and the temperature of 60 °C was selected as the most appropriate.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper