8757

EFFECT OF PROCESS CONDITIONS ON THE EXTRACTION OF POLYPHENOLS FROM PINEAPPLE RESIDUE AGRO-INDUSTRIAL

Favoritar este trabalho

The solid waste generated and disposed of by the agribusiness has bioactive compounds with antioxidant properties. The lack of a standard procedure for extracting these constituents motivated this work in order to determine condition for obtaining extracts from agro-industrial residue pineapple with higher yield polyphenols. In this work, the technique was applied to the experimental design in order to determine and optimize the best conditions for extraction of phenolic compounds from waste pineapple. The solvent extractors were selected methanol and acetone. The conditions were: time (30 to 90 min), temperature (30 to 50 ° C), solvent concentration (methanol or acetone) (50% to 90%) and stirring speed (100 to 300 rpm). The results demonstrated that acetone is the best solvent when compared with the methanol under the conditions studied, obtaining a concentration of phenolics (557.06 mg / mL). The continuity of the studies was performed with acetone, which applied the planning central composite design (DCCR) to optimize the extraction process. Conditions in Planning DCCR were: temperature: 35-48°C; agitation: 150-250rpm and concentration of acetone: 40-60%. Extracts with higher concentrations of phenolics (819.80 to 823.58g/mL) were obtained using acetone concentration of 50%, agitation of 250rpm and temperature 45-50°C. Extracts with higher concentrations of phenolics (819.80 to 823.58g/mL) were obtained using acetone concentration of 50%, agitation of 250rpm and temperature 45-50 ° C. The results shown the influence of the concentration of acetone in the extraction process, however, limited, demonstrated that high concentrations of acetone does not favor higher extraction efficiency.