To cite this paper use one of the standards below:
Alternatives have been explored for the reduction and/or replacement of synthetic polymeric materials due to the recycling and biodegradation difficulties. Paper-based packaging has increased interest due to its biodegradable nature; however, it exhibits limited water vapor barrier properties. Applying coatings on paper packaging can reduce this effect and allow the incorporation of bioactive compounds with antioxidant properties. Active compounds could be coated with the film-forming coating solution, but these substances can degrade during the coating and drying process. The objective of this study was the development of a paperboard system coated with chitosan and ethanolic garlic extract (EEA) using the printing technique. The paperboards were coated with film-forming solutions based on chitosan (2g/100g of solution), and EEA was printed (1 and 2 layers) using a Canon G3100 printer. The coated and printed papers were characterised for antioxidant activity using the DPPH• and FRAP methods. For the extraction of active compounds, coated paperboard samples (2 g) were dispersed in 20 mL of ethanolic solution (50%) for 24 ho (in the absence of light, at 25 ± 2°C). The increase in the number of prints did not increase the antioxidant activity, ranging from 0.93±0.09 to 1.09±0.01 µMol Trolox Equivalent/g of dry sample and between 4.33±0.23 to 5.19±0.20 µMol Trolox Equivalent/g of dry sample. Regardless of the method used, the values were reduced, possibly due to the low concentration of incorporated EEA. The printing method had a limitation regarding the number of printed layers. The results indicated that it is possible to integrate active compounds in coated papers using the printing method; however, it may be necessary to use more concentrated extracts.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper