To cite this paper use one of the standards below:
Watermelon is a widely consumed fruit, characterized by its high water content and bioactive compounds. However, its processing generates large volumes of waste, which poses environmental and economic challenges. In this sense, it is necessary to develop technologies that enable the valorization of these by-products, reducing waste and promoting sustainability. Among the available alternatives, convective drying is a widely used technique, as it favors conservation and makes it possible to obtain powdered ingredients. However, this process can cause degradation of compounds and oxidation of pigments, justifying the adoption of pre-treatments, such as immersion in ethanol and the use of ultrasound, capable of optimizing the process and minimizing losses. The objective of this study was to evaluate the drying kinetics of watermelon rind submitted to different pre-treatments, as well as to determine thermodynamic parameters and physicochemical properties of the powders obtained. The samples were cut to standardized dimensions (20 × 60 mm) and subjected to the following conditions: T1 – control (without pretreatment), T2 – immersion in ethanol (99.8% B.W., ratio 1:4 m/v for 10 min) and T3 – ultrasound (25 kHz, intensity of 4870 W/m² for 20 min). They were then dehydrated in a forced circulation oven at 50, 60 and 70 °C until they reached hygroscopic equilibrium. The drying curves were fitted to the Diffusion Approximation, Henderson and Pabis, Two-Term, Two-Term Exponential and Midilli models. The effective diffusion coefficients (Fick's second law), activation energies, and thermodynamic properties were also determined. After drying, the materials were disintegrated into flours and characterized for water content, water activity, and color parameters. The results indicated that the Midilli model best represented the process, presenting high coefficients of determination (R² > 0.999), low root-mean-square deviations (RMS < 0.03), and reduced chi-square values (χ² < 0.001). The pretreatments significantly influenced the drying process and the characteristics of the powders obtained, particularly T3, which presented lower water content and water activity, indicating greater stability. In the color analysis, the pretreatments reduced the luminosity and hue angle, in addition to increasing the intensity of red, yellow, and chroma compared to the control. The application of pretreatments associated with drying represents a promising alternative for the use of watermelon rind, enabling the production of stable powders with potential for use in the food industry.
Views per month
Galoá count, excluding known robots. Updated on 30/09/2026.
Views per month
Galoá count, excluding known robots. Updated on 30/09/2026.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper