EVALUATION OF FERMENTATIVE KINETIC PARAMETERS OF S. Cerevisiae INDUSTRIAL STRAINS IN DIFFERENT SUGARCANE HYDROLYSATES
In recent years, technological studies in the field of fermentation have focused on the search for and development of more robust microorganisms that are able to produce bioethanol from residual biomass with greater efficiency, being also resistant to the inhibitors generated during the industrial process. With this premise, the objective of this study was to evaluate the fermentative kinetic parameters of different industrial strains of S. cerevisiae when grown in sugarcane bagasse hydrolysates (acid, basic and enzymatic). It was studied 06 different industrial strains of S. cerevisiae (Catanduva/CAT-1 Plant, Pedra-PE-2 Plant, Pedra-Fermentec/FT858 Plant, São Manoel/SM Plant, Santa Adélia Plant/SA and Nardini Plant/NAD). After hydrolysis step the hydrolysates were adjusted to pH 5.0 and supplemented with glucose to a final concentration of 150 g/L. The fermentations were carried out in Erlenmeyers at 30ºC, pH 5.0 and 150 rpm, using the different hydrolysates as substrate. The samples were collected at pre-determined periods: 0, 12, 24, 36 and 48 hours of fermentation, centrifuged and submitted to analytical determinations. The biomass concentration was determined by gravimetric analysis of dried mass to constant weight at 60ºC. For the ethanol and sugars quantification was used the VARIAN® chromatograph HPX87H column with mobile phase of 5 mM H2SO4 and run time of approximately 25 minutes. From the results obtained, the fermentative kinetic parameters were calculated for the 6 strains studied. The results showed that the diluted alkaline hydrolysate registered the highest values of YX/S (0.166 g.g^-1 and 0.124 g.g^-1) for NAD and SA strains, respectively. However, the highest values of YP/S were recorded in the enzymatic and dilute alkaline hydrolysates (0.463 gg^-1 and 0.466 gg^-1) for NAD and SA strains respectively, that corresponding respectively to 90% and 87% of theoretical value.