EFFECTS OF THE PARAMETERS OF THE EXTRUSION PROCESS ON THE CHEMICAL COMPOSITION OF COWPEA (CV. BRS GUARIBA) COTYLEDON FLOUR
The cowpea cotyledon flour (CCF) as raw materials in extrusion process is an alternative for improving nutritional quality of snacks. To evaluate the effect of moisture content (M %) and temperature (T °C) of the extrusion process [Krupp Werner & Pfleiderer Co., ZSK30, twin screw at 260 rpm, 13 kg/h feed and die with two orifices (2.8 mm ᴓ)] in chemical characteristics of CCF (cultivar BRS Guariba) a factorial design of 12 treatments (t) combining M/T was used: [t1 (17/130), t2 (21/130), t3 (17/160), t4 (21/160), T5 (16.16/145), t6 (21.84/145), t7 (19/124), T8 (19/166), T9 (19/145), t10 (19/145 ), t11 (19/145) and T12 (19/145)]. The chemical analysis data in triplicate, including the CCF were submitted to analysis of variance and means were grouped by Scott-Knott test (p<0.05). Was observed four significantly distinct groups for protein (%) {[CCF (34.51±0.20)], [t7 (31.23±0.52) and t9 (31.14±0.62)]; [t12 (30.50±0.18), t10 (30.40±0.42), t2 (30.28±0.25), t6 (30.08±0.15) and t11 (30.02±0.24)]; [t5 (29.75±0.31); t1 (29.53±013) and t4 (29.39±0.30)]; [t8 (28.78±0.41) and t3 (28.78±0.17)]}, two for lipid (%) {[t10 (0.60±0.10), t7 (0.56±0.03), CCF (0.54±0.10), t11 (0.53±0.21), t9 (0.53±0.04), t5 (0.50±0.10)] and [t1 (0.42±0.14); t6 (0.36±0.15), t8 (0.34±0.06), t4 (0.33±0.06), t2 (0.30±0.17), t3 (0.22±0.13), t12 (0.18±0.04)]}, 5 to carbohydrate (%) {[t3 (66.63±0.08) and t8 (66.58±0.44)]; [t4 (65.92±0.03) and t1 (65.66±0.24)]; [t5 (65.41±0.46), t10 (65.26±0.63), t6 (65.16±0.20), t11 (65.05±0.16), t2 (64.92±0.15) and t12 (64.88±0.14)]; [t7 (64.37±0.52) and t9 (64.04±0.83)]; [CCF (60.13±0.59)]} and three for iron (mg/100g) {[t8 (5.70±0.38), t7 (5.25±1.06)], [t1 (4.88±0.54), t5 (4.88±0.30), t4 (4.86±0.13), t3 (4.83±4.83), t12 (4.71±0.40), t6 (4.64±0.19), t10 (4.56±0.12) and t11 (4.50±0.13)] and [t9 (4.28±0.15), t2 (4.09±0.09) and (CCF 3.63±0.16)]}.The t9, t10, t11 and t12 were repeats, but only for protein content were in the same grouping. The independent variables interfered significantly in chemical characteristics, except for ash, zinc, phosphorus, calcium, sodium and manganese.