Multi-Pass High Pressure Homogenization (MP-HPH) of Tomato Juice: Effect on the Rheological Properties
High pressure homogenization (HPH) is an emerging technology that can be used to promote desirable changes in liquid foods. The HPH of tomato juice decreases the suspended particle dimensions and distribution, resulting in higher particle-particle and serum-particle interaction. As a result, it was previous observed an increasing in product consistency, thixotropy, viscous and elastic behaviour. In addition, it has been shown that the multi-pass processing at smaller homogenization pressures (PH) was able to produce the same changes of one-pass processing at higher PH, but with smaller costs. However, only enzyme activity and microbial inactivation were evaluated. The present work evaluated the effect of PH and number of passes on the steady-state shear rheological properties of tomato juice. Samples were processed by HPH up to 100 MPa and three passes, being quickly cooled just after the homogenization valve. The rheological evaluation was carried out at 25ºC, considering a pre-shearing step to avoid thixotropy, followed by a linear decreasing stepped protocol (300/s to 0.1/s) in order to guarantee the steady-state condition. Sample particle size distribution (PSD) was measured by light scattering. The HPH increased the juice consistency, whose rheological behaviour was described by the Herschel–Bulkley model. The effect of the PH was asymptotic. However, both the rheological properties and PSD did not changed with the number of passes (up to three passes at 100 MPa). These results indicated that although HPH could be used to increase tomato juice consistency, the multi-pass processing is not significant for the product rheological properties.