To cite this paper use one of the standards below:
The production of biodegradable polymeric films with residues coming from the wine industry is promising due to the large number of components remaining in the residues after juice extraction. This work investigated the moisture, water activity and solubility of grape flour and its effect on biodegradable polymeric films prepared with cassava starch and grape flour. The grape flour with granulometry of 65 mesh was obtained by drying and milling the residue of Niagara (Vitis labrusca) grape from the wine industry. The films were prepared by casting method using 5 wt.% of cassava starch in water solution, 20 wt.% of glycerol and 0%, 0.5%, 1%, 2%, 4% (wt/wt) of the grape flour based on starch concentration. The filmogenic solution was submitted to ultrasonic bath at 60 °C for 5 min and then kept in a magnetic stirred at 75 °C for 20 min. The curing process was carried out at 40 °C for 24h. The moisture was determined by direct dry until constant mass. The water activity was measured using a AqualabPre® device and the solubility was determined using dried material in distilled water. The grape flour moisture was 12.18 ± 1.00%. The moisture was higher for the film without grape flour (7.73 ± 0.18%) than the film with 0.5% grape flour (5.09 ± 0.63%). The reduction of moisture for films prepared with grape flour may have occurred due to possible interactions between the plasticizer glycerol and the grape flour. The values of water activity for all samples were lower than 0.800, that is desirable to reduce the growth of pathogenic microorganisms. Films prepared with the highest percentages of grape flour (4%) showed a 91% decrease on the solubility in relation to the film without grape flour. It could be due to the presence of flour's insoluble fiber added to the films. The grape flour addition resulted in a decrease in the moisture and in the solubility of the films. However, there were no significant changes in all analysis for water activity. These results are important to define the application of this biodegradable polymeric film for products that require low moisture and water activity for packaging.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper