Favorite this paper
How to cite this paper?
Abstract

Freeze-dried instant coffee has gained prominence in the market due to its ability to better preserve volatile compounds and the sensory quality of the beverage compared to other drying methods. For its production, the coffee extract is previously concentrated under vacuum at low temperatures to optimize the yield of the final product. In this process, the soluble solids content (°Brix) of the concentrated solution plays a crucial role, potentially directly influencing the physicochemical characteristics of the coffee after freeze-drying. In this context, this study aimed to produce freeze-dried instant coffee (Coffea arabica) from 13/14 screen size beans with a dark roast and evaluate the impact of different °Brix concentrations, after the rotary evaporation process, on the color and water activity (Aw) of the final product. Three infusions were prepared using 125g of coffee grounds for 250mL of water, with extraction at 90°C for 30 minutes. After filtration with a Melitta® filter, the solutions were concentrated in a rotary evaporator at 65°C and 200 mbar until reaching 6, 18, and 22 °Brix. Then, they were frozen in an ultra-freezer at -80°C for 12 hours and freeze-dried for 24 hours. Color analysis was performed using a DeltaVista® colorimeter, obtaining the parameters L*, a*, and b*, and calculating the total color variation (ΔE) using the formula: ΔE* = √[(L2* - L1*)² + (a2* - a1*)² + (b2* - b1*)²], where indices 1 and 2 represent two different samples. Aw was determined using an AquaLab PRE-CAP device. The color variation (ΔE) between the samples was 4.10 (6 and 18 °Brix), 6.25 (6 and 22 °Brix), and 4.40 (18 and 22 °Brix), indicating that the increase in soluble solids concentration intensifies visual changes in the freeze-dried product. Aw values were 0.360 for 6 °Brix, 0.388 for 18 °Brix, and 0.351 for 22 °Brix, indicating that despite variations in solids content, all samples presented Aw compatible with stable products with low microbiological degradation risk. It is concluded that the soluble solids content before freeze-drying significantly affects the physicochemical properties of instant coffee, especially color, which may influence sensory acceptance. Furthermore, it is demonstrated that the 24-hour freeze-drying process is sufficient to reduce Aw to safe levels for product preservation, regardless of the initial solids concentration, ensuring microbiological stability of the instant coffee.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Universidade Federal Rural do Rio de Janeiro
  • 2 Universidade Federal de Uberlândia
  • 3 UFU
Track
  • Chemical and Physico-chemical Food Characterization (FQ)
Keywords
Colorimetry
Water activity
Coffea arabica