To cite this paper use one of the standards below:
Brazil is a leading global pineapple producer. However, the pineapple processing generates significant waste (peel, crown, and pulp). Sustainable extraction techniques, like microwave-assisted extraction (MAE), enable the recovery of bioactive compounds as an alternative to conventional process. MAE consists of the emission of electromagnetic waves that promote heat transfer through ionic conduction and dipolar rotation mechanisms. These mechanisms are associated with selective and fast heating properties that can be applied to solid and liquid samples. This study optimizes the phenolic compound extraction from pineapple waste using MAE in a laboratory-scale unit (ETHOS X). A central composite rotational design (CCRD) 23 was used with microwave power (22 to 268 W), solid/solvent ratio (1:6.5 to 1:23.5 w/v), and ethanol percentage (0 to 100%) as variables. Extraction time was fixed at 10 minutes, with a 3 g sample weight. Phenolic compound content ranged from 2.77 mg/g (22 W, 1:15 w/v, and 50% ethanol) to 6.44 mg/g (150 W, 1:23.5 w/v, and 50% ethanol). The best condition yielded higher phenolic content than the literature (0.82 mg/g) for water agitation extraction. Variance analysis (p < 0.05) indicated microwave power as the main influence, with a model determination coefficient of 90% (R2 = 0.9). Optimal extraction conditions are 168–220 W, solid/solvent ratio >1:22 w/v, and 55–65% ethanol. Fisher regression tests and design fit lack confirmed the model's significance and predictiveness (p < 0.05). MAE exhibited high phenolic yields from pineapple peel, making it suitable for optimizing extractions in different industrial sectors.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper