To cite this paper use one of the standards below:
Saccharomyces bourlardii is an yeast with high probiotic value. However,
maintaining its viability up to effective absorption is a challenge, due to the
numerous deleterious processing and metabolization conditions. Dehydration is
a well-stablished method for increasing the cultures' stability, and freeze-drying
is the most common, despite the high associated costs. The aim of this work was
to analyze the yield and cell viability of dried Saccharomyces boulardii via spraydrying,
using arabic and cashew gum as drying adjuvants. The drying conditions
were determined by a 24-1 experimental design and the influences of drying
temperatures (110 - 130 °C), type of drying adjuvant (arabic and cashew gum),
adjuvant concentration (10 - 20%) and inlet feed flow (0.42 - 0.68 L/h) were
investigated. Powder production yield and final moisture, hygroscopicity and cell
viability were assessed. In general, lower concentrations of drying adjuvant
(10%) favored cell viability, with highlight for the 10% cashew gum that presented
the highest viability results (5.7 x 10^5 CFU/g). On the other hand, production yield
was increased using arabic gum (66.4%). At higher inlet feed rates, the influences
of drying temperature were minimized, but the powder moisture was increased
for lower drying temperatures. Overall, despite the lower culture viability obtained
(10^4 - 10^5 CFU/g), which can be related to the high drying temperatures used,
this work demonstrates the possibility of using spray-drying as a less costly and
less energy-demanding drying technique for the production of powdered
probiotics, after process optimization. In addition, it shows the potential of cashew
gum, a regional product, as a drying adjuvant.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper