Favorite this paper

The craft beer market has been growing rapidly in Brazil. A wide range of beers and different aromas are already available in the market. The costs of acquisition of yeasts, thought, are still high, considering that a great part of the production of craft beer is at a small scale. The aim of this study was to evaluate the yeast reuse in the production of Pilsen craft beer. The must was obtaining by milling of 3.75 kg of Pilsen malt with 10 L of water. The must preparation used temperature steps of 40-45°C/15 min; 60-62oC/20 min; 70-72oC/15 min and final increase at 76-77oC. The filtration was done with 10 L of water at 70 °C and boiling at 100 °C/60 min, adding bitter hops at 10 min and aromatic hops at 50 min of boiling. The must was chilled at 30 °C, the trub was removed, and inoculated with Saccharomyces cerevisiae (Fermentis Safale US-05). The fermentation was conducted for 7 days at 20 °C (cycle zero). After this, there was the removal of yeasts, that were separated in two lots – one that was directly inoculated in the next fermentation (reuse) and other that was treated with H2SO4 solution (pH=2.5/2h) and later inoculated (recovery). After 3 cycles of reuse, there was a maintenance of yeast activity in both processes (reuse and recovery) and there was not significant differences among the beer produced with the original yeast (cycle zero) and the beers obtained with reused yeast. The beers presented an alcoholic content of 4.43-5.58o GL, acidity of 0.100-0.126% w/v and pH of 4.53-5.65. The results showed that both processes of reuse could be applied to the production of Pilsen craft beer without changes in the physical and chemical characteristics of the final product.