PRODUCTION OF BIODEGRADABLE NANOCOMPOSITES FROM POTATO STARCH REINFORCED WITH CELLULOSE NANOFIBERS
The interest in biodegradable films is a global trend that has motivated the exploration of natural sources (biopolymers), which are capable to producing continuous matrices. The starch is a potential polysaccharide for film production. Simultaneously, cellulose in nanometer size has been explored as reinforcement for polymer matrices, because it exhibits good mechanical strength, and barrier properties. Cellulose nanofibers (CNFs) were isolated from unripe banana peel, of variety “Terra”, using a combination of chemical and mechanical treatments. Nanocomposite (NC) was produced from a mixed suspension of commercial potato starch and CNFs by the casting method. Atomic force microscopy topography shows that control film (CF), without CNFs, displayed a more uniform and smoother surface compared to the NC. The roughness level of the CF and NC was 16.5 nm and 97.7 nm, respectively. Also, the NC showed higher opacity (67.2%) than CF (5.2%). At UV region (400 nm) the CF displayed light transmittance of 83.2% and NC of 48.8%. CF had similar density (1.16 g/cm3), and higher moisture (12.44%) and water solubility (51.2%) when compared with NC film (1.07 g/cm3, 11.04%, and 32.6%, respectively). NC film presented a reduction of water vapor permeability (9.1 x 10-11 g/s.m.Pa) compared to CF (and 10.3 x10-11 g/s.m.Pa). The CNFs incorporation improved the mechanical properties of the films. NC film showed to be more rigid presenting greater tensile strength (CF = 4.8 MPa; NC = 8.3 MPa) and Young’s modulus (CF = 234.0 MPa; NC = 240.1 MPa). While CF were flexible and as a consequence showed a higher elongation capacity (CF = 52.7% and NC = 27.1%). CNFs isolated from a residue (banana peels) offer the potential to reinforce composites of biodegradable polymers. The nanocomposite produced has potential use in food packaging, since the use of CNFs can promote improvements in barrier and mechanical properties.