Favorite this paper

Sodium chloride (NaCl) plays a decisive role in the structure of emulsified meat products. In this work, the changes caused in the technological characteristics of sausages produced in decreasing concentrations of NaCl were evaluated. Five formulations were processed with the following NaCl levels: 2% (F2), 1.75% (F1.75), 1.50% (F1.50), 1.25% (F1.25) and 1% (F1). The parameters evaluated were: differential scanning calorimetry (DSC), emulsion stability (ES) (% of water and fat released), and scanning electron microscopy (SEM). Salt reduction increased the transition temperature of myosin, as follows: F2 = 58.57, F1.75 = 58.01, F1.50 = 58.96, F1.25 = 60.13 and F1 = 60.16 °C. Salt causes the destabilization of the protein, leading to low denaturation temperatures. The denaturation temperature of meat proteins affects both the formation of the emulsion, and the distribution of water and fat in the structural network. In fact, there was an increase in the amount of exudate as a function of salt reduction. According to the linear equation obtained (Y = -21.15x + 49.46, p <0.05), for each reduction of 0.1% salt there was an increase of 2.11% of liquid released. Finally, MEV images showed a more compact structure for sausages with 1% salt than for sausages with 2 %. The expansion of fat, water and air inside the matrix leads to the formation of a porous structure, typical of emulsified meat products. The reduction of the amount of pores indicates that water and fat were lost during the cooking phase, giving rise to a more compact structure, which is a reflex of the low capacity of the emulsions with lower salt level to retain water and fat. In face of these results, one can conclude that the reduction of any percentage of salt altered the emulsion in all evaluated parameters.