CHARACTERIZATION AND EVALUATION OF NECTAR MIXED CUPUAÇU (Theobroma grandiflorum) AND JUICE PINEAPPLE (Ananas comosus) BARK
The processing of fruit waste may contain many substances of high nutritional value and with suitable technology this material can be converted into high-value commercial products. This study aims to determine the composition and evaluate the viscosity of mixed nectar. The product was prepared with 15% of cupuaçu pulp and 35% of pineapple peel juice, water and sugar to produce a nectar with a final soluble solids content of 11°Brix. Physicochemical and microbiological analyzes were performed on the final product. The rheological properties were measured on a Brookfield viscometer and Spindle (DIN-85). The measurements were performed in the range 10-60 °C, marketing temperatures of the finished product and representative of pasteurization in the industries and the experimental data fitted to the Potency Law model (PL). Microbiological analysis showed satisfactory results, with fecal coliform count (<3NMP / 100g) and absence of Salmonella in 25 g sample. The product has a pH (3.84), titratable acidity (0.83%) and SS/titratable acidity (13.25) essential for its conservation, besides having fiber content total (41.92%), characterizing it as a product with high fiber content. The results obtained by fitting the experimental data of the samples to the PL model indicated R2 values (> 0.96) at all temperatures and low values of χ2 therefore acceptable to describe the behavior. The product exhibited behavior index (n) of less than 1 (one), characterizing his pseudo-plasticity, and the relation of the apparent viscosity with strain rate showed a decreased in value with increasing strain rate in the samples. The temperature exerted an effect on the shear stress and apparent viscosity of the nectar, with lower values at 60 ° C. Therefore, the nectar prepared with fruit pulp and pineapple pulping residues can be considered a product with important nutritional value and the possibility of good stability during storage
and commercialization.