MICROWAVE AND CONVENTIONAL HEATING EFFECTS ON FRENCH FRIES PRODUCTION
Frying is a dehydration process which uses oils or fats for heat transfer, and it has been widely used in food preparation. It is well known that frying conditions affect the product quality. So, the aim of this work was the evaluation of microwave radiation for frying of potatoes (Solanum tuberosum L.), considering its impact on lipids oxidation parameters and mass transfer within product. The potatoes were cut in stick form before frying in conventional (CF) and adapted microwave (MW) systems by using soybean oil (SO) and vegetable fat (VF) under the same conditions of potato mass, frying medium volume, time and temperature of process. Physicochemical quality parameters of the potatoes and SO/VF were determined. The potatoes fried with MW presented moisture content 45% upper than CF, but MW treatment lead to higher absorption of lipids. The contents of total polar compounds in SO were higher than 25% in MW and CF after 5 and 7 days of frying, respectively, while the VF medium did not exceed 19.5% after 20 days of use. Higher values of conjugated dienes parameters, peroxide values, total polar compounds and refractive index were observed for MW treatments. This behavior could be explained by the higher loss of water from the product in this system, which promoted hydrolytic and oxidative reactions. Regarding the SO and VF fatty acids, a reduction of 4.0 and 2.0% for monounsaturated and 6.3 and 3.6% for poly-unsaturated was observed for MW and CF, respectively. MW frying process provided a higher inside temperature of potatoes slices in both fats. Thus it was demonstrated a potential use of MW radiation in the frying potatoes process mainly when VF is used due a similar frying medium stability.