11780

EFFECT OF THERMOPLASTIC EXTRUSION ON THE DEVELOPMENT OF INSTANT SOUPS MADE WITH CORN AND CARIOCA BEAN (BRS PONTAL) BLENDS

Favoritar este trabalho

Carioca bean (BRS Pontal) is well known of biofortification program in Brazil. The aim of this study was to evaluate the effect of the thermoplastic extrusion on the development of instant soups made with corn and carioca bean blends. The parameters used were: screw speed (318.2-392.9 rpm), feed moisture (10.9-21 g/100g) and bean content (4.8-55.2 g/100g) established by a second order experimental composite rotational design. The response variables were water solubility index (WSI), water absorption index (WAI), initial viscosity (V25), maximum viscosity at 95 °C (VMax), final viscosity (FV), bulk density (BD) and total pore (TP). Single screw extruder was used and the best samples tests were submitted to sensory analysis. The increase of bean levels increased the solubility of extruded flour, but did not affect significantly the values of water absorption. The viscosity profile of pre-cooked flours was consistent with the characteristic of instant products. The increase of feed moisture and bean content decreased bulk density as well as total pore but, the increase of screw speed increased these variables. The optimal points were: WSI (13.07 %); WAI (5.81 g gel/g dry matter); V25 (436.52 cP); VMax (157.86 cP); VF (390.26 cP); BD (1.472 g/cm³) and TP (0.320 cm³), to a value of desirability of 0.90. Soups made from pre-cooked flours with up to 45 g/100g of beans had good overall acceptability, appearance and flavor. Therefore, it is feasible the use of corn and carioca bean blends to produce pre-cooked flours, considering the conditions used in this experiment.