Optimization of total phenolic compounds extraction from Sargassum cymosum C. Agardh using response surface methodology

Vol.1, 2023 - 168636
Pôster
Favorite this paper
How to cite this paper?
Abstract

Phlorotannins are a class of polyphenol exclusively found in brown seaweed, having a plethora of bioactive compounds with industrial applications. Even though the most commonly used method of phlorotannin extraction is solvent extraction, there is no consensus on the best extraction method or the optimum conditions for extraction, since several factors interfere with the amount of phlorotannin extracted. Therefore, this study aims to optimize the extraction conditions through the use of response surface methodology utilizing the Box-Behnken Design (BBD) to maximize the phlorotannin content. Different treatment regimens were performed to evaluate the effect of the ethanol concentration (30, 50, and 70%), solvent/biomass ratio (10, 20, and 30 mL/g), and time (30, 60, and 90 min) on the extraction yield of phlorotannin. The dried and powder Sargassum cymosum was subjected to conventional extraction in the respective conditions, then filtered and ethanol was removed at reduced pressure, finally the crude extract was partitioned using ethyl acetate (1:1 v/v). The ethyl acetate fraction was recovered and subjected to phlorotannin quantification, expressed in mg of Phloroglucinol Equivalents per g of dry biomass (mg PGE/g), using Folin-Ciocalteau and the phloroglucinol as standard. The quadratic model presented good adequacy to experimental data (R2 = 0.90; p = 0.0067 and Lack of Fit = 0.2216), concentration (p = 0.0006) and solvent/biomass ratio (p = 0.0104) had a significant effect on phlorotannin extraction, while time had no significant effect (p = 0.6259). In addition, the interaction between concentration and solvent/biomass ratio showed a significant effect (p = 0.0067). The BBD was suitable for optimizing the total phenolic compounds extraction parameters, and the optimum conditions were: concentration of 70%, solvent/biomass ratio of 30 mL/g, and extraction time of 49 min, which achieved a maximum total phenolic compounds content of 0.5896 ± 0.025 mg PGE/g.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Universidade Estadual Paulista “Júlio de Mesquita Filho”
Track
  • Process Engineering and Emerging Technologies (ET)
Keywords
Brown seaweed; Bioactive compounds; Box-Behnken design