Para citar este trabalho use um dos padrões abaixo:
Saccharomyces bourlardii is an yeast with high probiotic value. However,
maintaining its viability up to effective absorption is a challenge, due to the
numerous deleterious processing and metabolization conditions. Dehydration is
a well-stablished method for increasing the cultures' stability, and freeze-drying
is the most common, despite the high associated costs. The aim of this work was
to analyze the yield and cell viability of dried Saccharomyces boulardii via spraydrying,
using arabic and cashew gum as drying adjuvants. The drying conditions
were determined by a 24-1 experimental design and the influences of drying
temperatures (110 - 130 °C), type of drying adjuvant (arabic and cashew gum),
adjuvant concentration (10 - 20%) and inlet feed flow (0.42 - 0.68 L/h) were
investigated. Powder production yield and final moisture, hygroscopicity and cell
viability were assessed. In general, lower concentrations of drying adjuvant
(10%) favored cell viability, with highlight for the 10% cashew gum that presented
the highest viability results (5.7 x 10^5 CFU/g). On the other hand, production yield
was increased using arabic gum (66.4%). At higher inlet feed rates, the influences
of drying temperature were minimized, but the powder moisture was increased
for lower drying temperatures. Overall, despite the lower culture viability obtained
(10^4 - 10^5 CFU/g), which can be related to the high drying temperatures used,
this work demonstrates the possibility of using spray-drying as a less costly and
less energy-demanding drying technique for the production of powdered
probiotics, after process optimization. In addition, it shows the potential of cashew
gum, a regional product, as a drying adjuvant.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo