To cite this paper use one of the standards below:
Seaweeds have hydrocolloids that are extracted from their cell walls like those of the genus Hypnea, carrageenan producers. This hydrocolloid is commonly used by the food industry due to its gelatinous form at room temperature. Due to this feature, it can be used in film making as a way to maintain or improve the quality of packaged foods and to reduce environmental pollution, as they are biodegradable. The objective of this work was to evaluate the characteristics of carrageenan films obtained from Hypnea pseudomusciformis marine macroalgae. Initially, H. pseudomusciformis carrageenan (HPC) was obtained using the chemical extraction process by immersing 10 g of seaweed flour in the water at 80 ° C for 1 hour, followed by filtration, precipitation (with alcohol. 2: 1), oven drying (70ºC), carrageenan collection and storage. For the development of the films, an experimental design was performed with three levels of HPC (25, 30, 35 g. 100 g -1), 120 mL distilled water and 0.36 g glycerine as a plasticizer, followed by pH adjustment. to 6.0, the solutions were stirred for 30 min at 90 ° C. The polymeric films were developed by casting technique and evaluated for their thickness, moisture, solubility, and macroscopic evaluation properties. The moisture values were similar in the treatments with the addition of 25 and 35 g. 100 g-1 carrageenan, with the treatment with 30 g 100 g-1 lower values (24.8%). Regarding the thickness of the films, the values ranged from 0.059 to 0.078 mm. All films presented 100% solubility and homogeneous aspects. Thus, given the observed properties and high solubility, these films could be used as packaging for fruits and vegetables as a way to maintain their integrity and inhibit possible microbial actions.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper