To cite this paper use one of the standards below:
The wheat malting process presents changes in its composition, of great interest to the food and beverage industry. Considering that the knowledge of water sorption properties becomes one of the important foundations in all malt production processes and the scarcity of this information in the literature. Thus, the objective of this study was to determine the adsorption isotherms of wheat malt, as well as the thermodynamic properties of the material. The isotherms were determined by the static gravimetric method using controlled temperatures of 10, 20, 30 and 40 °C. The models of GAB, Oswin, modified Oswin, Henderson, modified Henderson and Halsey were used to adjust to the experimental data of the different temperatures. From the results obtained the isosteric heat was calculated for each equilibrium water content using the Clausius-Clapeyron equation derivative. The model that best represented the results of wheat malt isotherms for the conditions analyzed was the Henderson model. However, the GAB model also provided a good fit in addition to providing physical meaning through its parameters. It was observed that the isosteric heat increases with the decrease of the water content, indicating greater energy for the removal of water from the product. The isosteric heat values for wheat malt with water content between 0.03 and 0.30 (b.s.), for the temperature range of 10 to 40 °C, ranged from 1071.82 to 36.95 kJ kg-1. The enthalpy and differential entropy were strongly dependent on the equilibrium water content. The adsorption process of wheat malt is controlled by enthalpy and the free energy of Gibbs is negative for the temperatures studied and decreases throughout the adsorption process for the same temperature, characterizing as a spontaneous process.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper