Immobilization of Candida antarctica lipase B on activated carbon obtained from ora-pro-nobis (Pereskia aculeata Miller) fiber
The high applicability of lipase as a biocatalyst in various biotransformation processes makes it important for the chemical and food industries. For economic and practical reasons, it is more feasible to use it in its immobilized form, in order to reduce the process costs and allows its reuse in successive reactions. The aim of this work was to evaluate different protocols for lipase immobilization on activated carbon produced from ora-pro-nobis (OPN) fibers. The effect of pH (3.0, 5.0 and 8.0) of lipase solution on the immobilization parameters (hydrolytic activity, immobilized protein, activity recovery and yield) was evaluated. The lipase immobilization by adsorption was performed in tubes using 5 mL of enzyme solution (0.3 mg/ml of protein) and 0.1 g of activated carbon from OPN fiber. The tubes were stirred (50 rpm) for 1 h at 25 ᵒC and then filtered. The filtered activated charcoals were washed with distilled water, dried (40 ᵒC) and stored. The protocol of lipase immobilization by adsorption followed by crosslinking was the same for immobilization by adsorption, and after 1 h of adsorption, 2% (v/v) of glutaraldehyde was added to the tubes containing the enzyme for the biocatalyst crosslinking. The hydrolytic activity was determined by olive oil emulsification method and the protein content was quantified by the Bradford method. Results were subjected to the regression analysis and it was verified that linear and quadratic effects of pH significantly affected (p<0.05) the immobilization parameters. The highest results of hydrolytic activity (0.14 U), activity recovery (45.86 %), immobilized protein (3489.14 mg/g) and yield (81.98 %) were found at pH 5 using the protocol of immobilization by adsorption. The immobilization with crosslinking resulted in a loss activity by the enzyme. The results demonstrates that the activated charcoal from OPN fiber is a good support for lipase immobilization by adsorption.