CHARACTERIZATION OF GUAVA (Psidium guajava L.) PULP POWDER BY CAST-TAPE DRYING
Cast-tape drying (CTD) is a relatively new technique for dehydration and production of food powders. The product to be dried is spread onto a surface which is in contact with hot water or steam. The purpose of this study was to investigate the CTD drying of guava pulp using steam at 98 °C as heating source, Teflon® as surface material of the support and 3 mm product thickness. Powders produced by CTD were characterized through chemical analyzes performed on feedstock and powders, by means of extract preparation and posteriorly spectrophotometry. Quantification of total phenolic compounds was accomplished according to Singleton, Orthofer and Lamuela-Raventos (1999) method, with absorbance reading at 760 nm wavelength. Total carotenoids were analyzed following the methodology described by Rodriguez-Amaya (2001) and absorbance reading was at 472 nm wavelength. Guava pulp before processing presented total phenolic compounds of 1361,28 mg gallic acid in 100 grams (dry basis). Powder produced by CTD showed value of 1324,11 mg gallic acid in 100 grams, not statistically differentiating from that found in pulp. All samples presented high values of total phenolic compounds considering that the analysis method is not specific and is susceptible to the presence of interfering compounds. Besides, smaller size and shape of powder particles generally increases the extraction efficiency. Guava pulp presented high carotenoid content, of 291.67 µg of lycopene equivalent per gram (dry basis). Degradation of carotenoids during CTD process was 36.97%, due mostly to oxidation and temperature exposure. Those results suggest good retention of chemical characteristics, however, inaccuracies in spectrophotometric assays should be considered, despite they provide a good estimate of the chemical compounds present in the materials. Thus, guava pulp can be dehydrated by CTD for production of guava powder of excellent quality. The process allows continuous operation, which enables its industrial use in different scales.