FAST WATER ACTIVITY SURFACE ACOUSTIC WAVE SENSOR FOR MONITORING FOOD QUALITY AND INDUSTRIAL PROCESSES IN FOOD INDUSTRY
Water activity (Aw) is very important for the food industry because it influences the velocity of enzymatic, chemical and microbiological reactions. Commercially available Aw measurement equipment based on dew point evaluation is expensive and its response can be time consuming for some types of samples. We present the Surface Acoustic Wave (SAW) sensor with the graphene oxide nanofilms as the sensitive element designed for alternative way of rapid Aw measurement. Calibration curve (CC) of the developed sensor was obtained by 7-th order polynom approximation of the results of Aw measurements of 13 saturated salt solutions. This CC was used for evaluation of the Aw for 32 different food samples, which cover all interval of Aw. Simultaneously the Aw of all 32 samples was measured by Decagon 4TE to evaluate precision of the developed sensor. For 19 samples the absolute difference of Aw measurement by the SAW sensor and Decagon did not exceed 0.03, and for 9 samples the difference was between 0.03 and 0.07. Four samples measured by the SAW sensors gave Aw higher than 1 which corresponds to the fact that thermodynamic equilibrium was not reached during the measurement process. Average measurement time was 37 sec for SAW sensor and 294 sec for Decagon. It was concluded that the developed sensor, being faster than a typical commercial one, can be used for rapid and precise Aw measurement for various types of food samples. The use of the fast SAW sensor opens the possibility to monitor directly Aw in food industry process and its low price may expand the Aw measurement technique for agriculture, industry and laboratories. The ability of extracting kinetic characteristics of the water desorption can add additional parameters of the control of food samples quality and process.