Para citar este trabalho use um dos padrões abaixo:
Saturated fats (SF) and trans-fatty acids (TFA) play an important role in food industry due to their sensory and technological properties in foodstuffs, mainly in texture aspect. Therefore, technological innovations are sought to produce lowsat and lowfat products by structuring unsaturated oils. This technology has received significant interest from scientific community, linked to the possibility of developing new products with viscoelastic gel-like structures beyond enhanced nutritional profiles. Emulgels are among the oil structuring approaches, consisting of oil-in-water emulsions constructed via structuring agents such as mono-acylglycerol, proteins, and polysaccharides. Due to steric hindrance and surface-active features, some polysaccharides have been applied in emugels structuration. In this context, methylcellulose (MC) and chitosan (CHI) are promising due to their amphiphilic and thermal gelling properties, which allow the production of emulsions with mechanical properties of a solid. This work aimed to produce emulgels as a potential replacement for SF and TFA from combination of MC with CHI in different proportions (80MC:20CHI; 70MC:30CHI; 60MC:40CHI) with sunflower oil (ratio fixed). The two polysaccharides dispersion was prepared at 2% (w/v); MC was dispersed in water while CHI was in a phosphoric acid solution (1% v/v). These emulgels were evaluated by droplet size distributions and rheological characterization concerning steady shear and oscillatory (strain, frequency, and temperature sweep) tests. As results, the emulgels are structured and like cream spreads. The microscopy revealed spherical droplets and oil-in-water emulsions with drop sizes (D [4,3]) from 27.40 ± 0.50 to 22.05 ± 0.48 µm. The increase in MC ratio promoted the size decrease by approx. 18 % could be attributed to increased methoxyl groups (radicals with surface-active nature) in dispersed phase. Emulgels showed pseudoplastic behavior with apparent viscosity ranging from 1.67 ± 0.01 to 1.45 ± 0.03 Pa.s in those the increased MC concentration proportionally increased the viscosity. Concerning the oscillatory tests, all emulgels showed a high G' (storage modulus) than G'' (dissipation modulus) along the strain range from 0.01 to 100 %, indicating systems were more elastic over viscous behavior with a very structured and stable network, i.e., forms strong gels. Emulgels with MC and CHI also were stable in high frequency-dependent tests (from 0.1 to 10 Hz). The 70MC:30CHI showed more elastic behavior in the low-frequency range than other emulgels. In the temperature scan (5 to 90°C), the emulgels exhibited gel behavior. Systems with 80 MC:20CHI and 70 MC:20CHI showed gel strength greater than ten at temperatures 65, 75, and 85°C. The extent of gelation of these systems favors the application of these emulgels in various food matrices that involve heating. While on cooling (from 90 to 5°C), They presented resistance in decreasing the values of G' and G'', indicating the absence of reversible properties from the polysaccharides’ combination. Therefore, emulgels obtained from MC, specifically 80MC:20CHI and 70MC:30CHI, have good thermal resistance and can be an alternative to provide a solid structure to vegetable oils and to study their application as a substitute for SF and TFA in different matrices, which require heating in their industrial processes.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo