To cite this paper use one of the standards below:
ALTERNATIVES FOR THE SYNTHESIS OF CATALYSTS BASED ON MICRO-MESOPOROUS ZEOLITES
Rodrigo Valderrama Zapata
Universidad Industrial de Santander
Now you could share with me your questions, observations and congratulations
Create a topicThe synthesis of catalysts based on zeolites through green routes is a topic of current interest, especially when they can be used in industrial-scale reactions such as hydrodesulfurization. In this work, we sought to carry out the green synthesis of Ni and NiMoS catalysts supported by micro-mesoporous zeolites type H+-Y and ZSM-5, respectively. Ni/H+-Y catalysts were synthesized by strong electrostatic adsorption (SEA) and NiMoS/ZSM-5 catalysts were synthesized by mechanochemical impregnation. The physicochemical properties of both supports and catalysts were evaluated and finally tested in dibenzothiophene (DBT) hydrodesulfurization (HDS) reactions. The results showed that the materials synthesized by the green routes present the same or better conversion of DBT than the conventional synthesis routes, which demonstrates the mechanochemical impregnation of zeolites and the use of Ni as an active phase in hydrodesulfurization reactions are branches of study. promising for an industrial application.
Glaucio José Gomes
Hola, felicitaciones por el interesante trabajo. Mirando la Figura 2 se nota que los catalizadores fueran testados hasta 8 horas de reacciones. a) cual es el motivo de la reducción de la actividad catalítica del catalizador Ni/H+-YM (Fig 2b, linea roja) entre 1 y 2 horas de experimento? b) Que pasa con el catalizador Ni/H+-Y depués de 5h horas de reacción(Fig 2 b)?
Gracias por la atención,
Glaucio
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper
Rodrigo Valderrama Zapata
Buen día, Glaucio.
Gracias por sus palabras.
Inicialmente, para responder la segunda pregunta. Cuando se inicieron las primeras pruebas en reacción de los catalizadores, se detuvieron cuando no se percibía un fuerte cambio en la conversión del DBT, sin embargo, las últimas pruebas decidimos dejar completar toda la reacción hasta que se acabara el alimento, por eso con el catalizador de Ni/H+-Y solo se registraron 5 horas de reacción. No obstante, con el ánimo de analizar más a fondo la estabilidad de los catalizadores, se planea repetir las reacciones y ampliar el tiempo de estas.
Con respecto a la primera pregunta, tenemos la hipótesis que debido a la acidez del soporte y la facilidad de acceso a los sitios activos, gracias a la presencia de mesoporos, hay una alta actividad, esta actividad creemos se disminuye debido a adsorciones fuertes de los reactivos o incluso productos o subproductos en los sitios ácidos del soporte, lo cual los bloquea e impide que puedan continuar su actividad catalítica. Sin embargo, estamos terminando unas pruebas de acidez para poder corroborar o descartar esta hipótesis.
Glaucio José Gomes
Hola Rodrigo, gracias por su atención en contestar.
Rodrigo Valderrama Zapata
Con gusto, Glaucio.
Quedamos atentos a cualquier otra inquietud.