To cite this paper use one of the standards below:
Soil organic carbon (SOC) monitoring requires analytical tools that are both scalable for measurement, reporting and verification process (MRV). We assessed whether fusing X-ray fluorescence (XRF) information with vis–NIR spectra improves SOC prediction when models are trained on large spectral libraries and transferred to local samples, and we translated model performance into practical recommendations using a fitness-for-purpose framework. A national spectral library of was used to build a global Cubist model, while nine local spectral libraries supported local partial least squares models. Two sensing scenarios were compared, vis–NIR alone and vis–NIR+XRF data fusion. Overall accuracy gains from sensor fusion were modest under global modelling but more evident under local modelling. Globally, vis–NIR+XRF achieved RMSE of 1.56 g kg⁻¹ versus 1.57 g kg⁻¹ for vis–NIR. Locally, fusion reduced RMSE from 1.13 to 0.95 g kg⁻¹ and decreased the error profile. Fitness-for-purpose evaluation revealed that suitability depends on within-farm SOC variability. All sensing scenarios were not recommended in low-variability farms. In medium variability farms, vis–NIR with local models achieved a “use with caution” classification, while fusion using local model was recommended. In high variability farms, all scenarios were recommended regardless of calibration strategy. For temporal monitoring, the small annual SOC change leads to low analytical tolerance, making sensor-based inference unsuitable over short windows. Temporal monitoring only becomes acceptable from 14 years onward and only for high sequestration potential under local calibration. These results clarify when sensor fusion and modelling strategy translate into actionable SOC monitoring services helping to support adoption.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper