NUMERICAL MODEL FOR ANALYSIS OF THE DAMAGE PRESENT IN THE COMPOSITE LAMINATE SUBJECTED TO LOW-SPEED IMPACT

- 316570
Oral communication - Step 2
Favorite this paper
How to cite this paper?
Abstract

The composite material, when subjected to the various loads, has a complex behavior, due to the anisotropy induced by the fibers. When subjected to low-speed impact, these materials have fragile behavior, with the reduction of mechanical stiffness as the main change suffered, and there may be multiple failure modes, compromising their structural strength and leading to the final failure of the material. This paper presents the elaboration of a numerical model that had its results compared to those obtained in two experimental trials existing in the literature. The objective was the identification and analysis of damage caused by low-speed impact, in particular the damage of the material due to delamination. The models were built with the features available by LS-DYNA and LS-PrePost software. Satisfactory results were obtained for the overall behavior of the models, consistent with what was observed in the experimental trials used. The intralaminar and translaminar cracks for the matrix and fibers, respectively, were also in accordance with expectations. For interlaminar failures, satisfactory results were also obtained for the delaminated area at most interfaces, with few interfaces showing more significant differences than those obtained experimentally.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Universidade Federal do Rio de Janeiro (UFRJ)
  • 2 UFRJ/COPPE
Track
  • Integrity management and life extension (including inspection and maintenance)
Keywords
Delamination
Composite Material
Impact
Laminated