This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/sobena-2024-195550
If you've NEVER registered a DOI in your Lattes, check our tutorial!Waterway transport, especially maritime transport, has been going through constants
improvements to meet the evolving demands of global trade. With this, it is possible
note a continuous growth in the capacity of the vessels, which consequently leads < /> to an increase in the power of the thrusters. Thus, a significant concern arises
with the consequences suffered by mooring structures, which can be impacted
significantly in its stability, due to the increased use of large < /> thrusters bow thruster in order to facilitate the maneuverability of ships. The jet generated by the
thruster, during the berthing or unberthing process, can induce bottom currents,
that can be substantial. The action of the ship's propeller is a major factor in bottom erosion,
due to the resulting current velocities that can reach up to 8m/s near the bottom. A
Magnitude of erosion depends on the bottom material and the hydraulic parameters of the runoff.
This erosion is known as the scour phenomenon, which basically refers to the removal of < /> sediments caused by runoff, which in many cases threatens the integrity of the < /> structural structure of a closed wall gravity pier. The present work is motivated by
need to analyze the hydrodynamic mechanisms involved in the interaction between de
jets Ship's bow thrusters, gravity dock wall tilt and the phenomenon of scour
through experimental trials
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper