This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/sobena-2024-195554
If you've NEVER registered a DOI in your Lattes, check our tutorial!Boundary layer theory is applied to regions close to the contact of the fluid with a solid surface for high Reynolds number flows. The fundamental hypothesis for the boundary condition of a viscous fluid with a solid surface is that of adhesion, regardless of the magnitude of the fluid viscosity. Such a hypothesis was introduced by Prandtl (1904) and is considered by many to be the most important contribution to fluid dynamics. In this context, the boundary condition for the viscous fluid consists of the imposition of zero velocity at the contact with the solid surface at rest. At high Reynolds numbers, the transition from zero velocity to the characteristic flow velocity occurs at an infinitesimal distance in the direction normal to the surface, generating high velocity gradients and, consequently, significant viscous stresses. The flow in this region, which corresponds to the boundary layer, is fundamental for the evaluation of drag and lift forces in slender bodies with high radii of curvature, usually called lifting surfaces. Ship hulls, rudders, hydrofoils, ship propeller blades and wind turbine blades are examples of lifting surfaces in ocean engineering. In the context of coastal engineering, understanding flow in the boundary layer is of fundamental importance for the study of protective structures, such as breakwaters and jetties, for the study of the interaction of waves with walls (clapotis), for the study of stability and seabed erosion, among others. Coastal environmental flows are dominated by waves and currents. Studies on current-induced boundary layers are recurrent in the literature, however, they are scarce in the case of wave-induced boundary layers. In this context, this work aims to carry out an experimental study on the boundary layer induced by an oscillatory flow on a flat plate. The study is carried out in a channel 16 meters long and with a cross section of 0.72 m x 0.78 m. The channel has a wedge-type wave generator and instrumentation to measure the elevation of the free surface. The objective of the study is to visualize the velocity field in the boundary layer for different inclinations and roughness of the plate. The velocity field is obtained through a particle image velocimetry (PIV) system for different periods and wave amplitudes. From flow analysis it is possible to establish the influence of different parameters on the hydrodynamics of the interaction of the wave flow with the plate.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper