This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/sobena-2024-195558
If you've NEVER registered a DOI in your Lattes, check our tutorial!The development of wind farms around the world is becoming a reality due to the need to create new sustainable energy alternatives. In Brazil, the absence of these ventures underscores the importance of acquiring the knowledge necessary for offshore installations. This study aims to investigate experimentally how wave action influences the phenomenon of 'scour' around wind turbines in nearshore areas, generating knowledge for public use. Waves with periods of 2.5s, 1.62s, 1s and 0.81 seconds were generated, and three different cylinder diameters (40mm, 100mm and 150mm) were tested. The particle image velocimetry (PIV) system was used to measure the velocity fields and analyze the movement of the bottom at the base of the cylinders, simulating wind towers. The results highlighted that periods of 1 second and 0.81 seconds were the most critical for bottom movement and removal, especially for the structure with a diameter of 100 mm. The analysis of the images revealed that these periods were the most influential in the modification of the sandy bottom of the tests, due to the energy generated by the system. It was also observed that the period of 0.81 seconds resulted in a higher number of ripples. Comparing the cylinders, it was found that the diameter of 100 mm presented the largest bottom movements, with average armholes of 5 mm in the periods of 1 second and 0.81 seconds
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper