Este trabalho foi publicado pelo Galoá e tem um DOI depositado. Para citar este trabalho, use um dos padrões abaixo:
Caso você seja um dos co-autores e queira cadastrar esse trabalho no seu Currículo Lattes, use o seguinte código: doi > 10.17648/sobena-2018-87611
Se você NUNCA registrou um DOI no seu Lattes, veja nosso tutorial!The floater structure is responsible for one of the main costs of a floating offshore wind turbine (FOWT), leading to a large effort to reducing its structural weight in new designs. In this context, this paper describes the concept of a very light semi-submersible floater consisting of a central column, which sustains the tower, connected by pontoons to three equally spaced columns. The central column is connected by guy-wires to the top of the offset columns, allowing for a light structure.
In order to investigate the performance of this FOWT concept, an experimental campaign of a 1/80th scale model was performed in a wave basin. As the FOWT is structurally light, both pontoons and guy-wires are subject to the effects of hydroelasticity. Only waves were considered, thus wind effects are not addressed. The main results are the tension at the guy wires, the strain at selected positions on the pontoons, and the first order motions of the FOWT. The motions are compared with numerical simulations performed with the software NK-UTWind, METiS-USP, and WAMIT.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo