This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/sobena-2018-87611
If you've NEVER registered a DOI in your Lattes, check our tutorial!The floater structure is responsible for one of the main costs of a floating offshore wind turbine (FOWT), leading to a large effort to reducing its structural weight in new designs. In this context, this paper describes the concept of a very light semi-submersible floater consisting of a central column, which sustains the tower, connected by pontoons to three equally spaced columns. The central column is connected by guy-wires to the top of the offset columns, allowing for a light structure.
In order to investigate the performance of this FOWT concept, an experimental campaign of a 1/80th scale model was performed in a wave basin. As the FOWT is structurally light, both pontoons and guy-wires are subject to the effects of hydroelasticity. Only waves were considered, thus wind effects are not addressed. The main results are the tension at the guy wires, the strain at selected positions on the pontoons, and the first order motions of the FOWT. The motions are compared with numerical simulations performed with the software NK-UTWind, METiS-USP, and WAMIT.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper