Favorite this paper
How to cite this paper?
Abstract

3D printing has revolutionized several industrial sectors, and the food industry is keeping pace by seeking materials compatible with this technology, aiming to develop customized products that meet consumer demands. In this context, starches stand out as promising raw materials; however, they exhibit distinct characteristics depending on their botanical origin, which can directly influence their technological performance and application. Additionally, the use of regional sources for starch extraction and product development represents a relevant strategy for valuing biodiversity and local culture, contributing to the socioeconomic development of communities. This study aimed to evaluate the impact of micronized starch addition on the rheological properties of pastes based on Ariá starch (Goeppertia allouia), focusing on their application in 3D printing. The rhizomes were obtained from the Federal Institute of Education, Science and Technology of Amazonas – East Zone Campus (IFAM-CZL) and transported to the School of Food Engineering (FEA-UNICAMP), where the starch was extracted and micronized using a cryogenic mill for 10 minutes. Five paste formulations containing 10% starch were prepared, varying the proportion of micronized starch (0 to 20%). Glycerol (3%) was used as a plasticizer, and distilled water as the solvent. The samples were heated to induce starch gelatinization (90 °C for 15 minutes), centrifuged, cooled for 24 hours, and subsequently subjected to rheological analyses using an Anton Paar MCR 102 rheometer, including shear, viscoelasticity, and thixotropy tests. The results demonstrated that incorporating micronized starch significantly influenced the rheological behavior of the Ariá-based pastes. A progressive increase in viscosity was observed with the addition of micronized starch, particularly in the MS15 and MS20 formulations. These samples exhibited more cohesive and structured gel networks, as evidenced by higher storage modulus (G′) values, indicating enhanced elastic behavior and greater resistance to deformation. All formulations exhibited pseudoplastic (shear-thinning) behavior, characterized by a decrease in viscosity with increasing shear rate, which is advantageous for extrusion-based 3D printing applications. Among the samples, MS20 stood out by presenting the highest structural recovery rate after deformation (89.55%), compared to MS0 (67.43%). Overall, the data confirm that micronized Ariá starch enhances the viscoelastic properties of the pastes, favoring their applicability in 3D food printing. These findings highlight the potential of this underutilized regional starch as a functional, sustainable, and technically viable ingredient for advanced food fabrication technologies.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Food4You Research Group, Faculdade de Engenharia de Alimentos, Universidade Estadual de Campinas – SP
  • 2 Faculty of Food Engineering, UNICAMP, Brazil
  • 3 Departamento de Engenharia de Materiais e Manufatura, Faculdade de Engenharia Mecânica, Universidade Estadual de Campinas – SP
  • 4 Instituto Federal de Educação, Instituto Federal do Amazonas
  • 5 UNICAMP
Track
  • Food Formulation and Processing (FP)
Keywords
Goeppertia allouia
Rheology
Amazonian starches