To cite this paper use one of the standards below:
By-products from coffee processing arise at different operational stages (harvesting, post-harvest, roasting, and consumption), with coffee husks as a representative example. Although these residues are little explored industrially, they can be repurposed for the development of biodegradable films, given their lignocellulosic composition and the presence of bioactive compounds; moreover, they may confer improved mechanical properties. In this context, the aim of this work was to incorporate coffee husks into cassava-starch-based biodegradable films and evaluate their mechanical properties. Two coffee husk samples, A1 (green fruit) and A2 (ripe fruit), were oven-dried at 105 °C, milled in a knife mill, and standardized to 200 mesh to obtain coffee husk flours. The films were then prepared by solution casting: a suspension of cassava starch (5%) in deionized water was homogenized for 15 min under stirring. The solution was heated to 75 °C for 30 min under constant stirring to gelatinize the starch. Subsequently, glycerol (30%) was added and the mixture was stirred for a further 5 min, followed by the addition of coffee husk flours (10%). Mechanical testing was carried out on a universal texture analyzer, evaluating tensile strength, elongation at break, and Young’s modulus. Tensile strength for A1 and A2 (3.21 and 2.89 MPa, respectively) showed significant differences (p < 0.05) relative to the control (1.78 MPa), increasing film strength by 80.34% (A1) and 62.36% (A2). For elongation, no difference was found between the control (38.36%) and A2 (49.82%), whereas A1 (61.89%) was significantly higher (p < 0.05). Accordingly, incorporating coffee husk flours increased elongation at break to 61.89% for A1. Regarding Young’s modulus, reductions of 29.34% (A1) and 14.86% (A2) were observed relative to the control. Even so, no significant differences were found between the control and A2 films, nor between A1 and A2, whereas the control and A1 differed from each other. Thus, incorporating coffee husk flour improved the films’ mechanical characteristics, making this an environmentally friendly and promising alternative for bioplastic applications.
Views per month
Galoá count, excluding known robots. Updated on 30/09/2026.
Views per month
Galoá count, excluding known robots. Updated on 30/09/2026.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper