PHYSICOCHEMICAL ANALYSIS FOR DETERMINING THE QUALITY OF ISOTONIC AND CARBOHYDRATED BEVERAGES MARKED IN BELO HORIZONTE-MG

vol. 4, 2019 - 115350
Pôster
Favorite this paper
How to cite this paper?
Abstract

Isotonic drinks is a well known beverage which serve to replace water and minerals salts lost during intense physical activities. In its composition are present water, sodium and potassium, as well as carbohydrates, flavoring and in some cases may contain vitamins. To evaluate the veracity of the label information and certify the quality of the consumed product, physicochemical analysis of samples of isotonic drinks of different brands and flavors were performed. For the determination of sodium and potassium of the samples the Atomic Absorption Spectrophotometry technique was used (Atomic Absorption Spectrophotometer - Varian) and routine and addition curves were constructed to optimize the results and verify no matrix interference. For the titratable acidity assay the neutralization volume was used with a 0.1 mol/L NaOH solution. For pH determination, a previously calibrated digital pHmeter was used and soluble solids were determined by refractometry using Abbé Refractometer. Results for sodium ranged from 211 to 546 mg/L and were 1.21% above label values while for potassium ranged from 105 to 140 mg/L (7.9%) below label values. However they are in accordance with the ANVISA's regulation, RDC 18/2010, which provides for sodium concentration between 460 mg/L and 1150 mg/L and for potassium below 700 mg/L. The pH of the samples at 25°C was between 2.98 and 3.69 and the titratable acidity ranged from 3.23% to 6.35%. The more acidic pH optimizes the perception of flavors. Soluble solids ranged from 0.083 to 5.83°Brix depending on brand and sample. Indiscriminate ingestion of isotonic drinks may offer health risks, especially hypertension, and may also cause kidney failure and dental erosion due to electrolyte concentration and pH. Therefore, it is concluded that the labeling information needs to be in accordance with the quantities contained in the product, ensuring the consumption.

Institutions
  • 1 Centro Federal de Educação Tecnológica de Minas Gerais
Track
  • 2. Chemical and physicochemical characterization of food (FQ)
Keywords
physicochemical analysis
Isotonic drinks
Sodium and potassium