Para citar este trabalho use um dos padrões abaixo:
Salting-out Induced Liquid–liquid Microextraction for antiemetic residues in sediment samples using liquid chromatography coupled to mass spectrometry
Darliana Mello Souza
Universidade Federal de Santa Maria
Agora você poderia compartilhar comigo suas dúvidas, observações e parabenizações
Crie um tópicoWatch this next:
In recent years the occurrence of pharmaceuticals in the environment has been a matter of growing concern. Methods for the analysis of pharmaceuticals in water, particularly in effluents from sewage treatment plants, have been reported. In contrast, analytical methods for pharmaceuticals in solid matrices, as sludge and sediment, are scarce, impairing the evaluation of polluted areas. The aim of this study was to develop a time and cost-effective multi-residue method to extract and determine three antiemetic drugs in polluted sediment. The superficial sediment was collected in the stream in which the effluent from the University Hospital of Santa Maria (at UFSM Campus) is released, after microbiological treatment. Target analytes were ondansetron, metoclopramide and bromopride. The quantification was performed with liquid chromatography quadrupole mass spectrometry – LC-MS (Shimadzu, Kyoto). The instrumental conditions for LC-MS were as follows: Shim-pack CLC-OSD column (5 µm, 150 x 4.6 mm); column oven temperature at 35 ° C; injection volume of 10 μL; gradient elution mode for mobile phase (0.8 ml min-1 constant flow) composed by (i): eluent A - 5 mmol L-1 of ammonium formate containing 0.1% formic acid and (ii) eluent B - acetonitrile containing 0.1% formic acid; total running time of 16 min; electrospray ionization in positive mode. The general procedure consisted of using 0.5 g of dry sediment, to which 5 ml of water were added followed by stirring for 2 min, with posterior addition of 1.3 mL of solvent for extraction, 2 g of salt and a final step of 2 min of agitation, plus 5 min for centrifugation. The supernatant was removed, evaporated under nitrogen flow at 40 ° C and resuspended in 1 ml of acetonitrile for analyzis by LC-MS. As extraction solvent, acetone, acetonitrile, ethyl acetate, isopropyl alcohol, methanol, ethanol and a mixture of these in a 1: 1 (v/v) ratio, were evaluated. The best recoveries were obtained using a mixture of ethyl acetate and acetone. As the salt, anhydrous magnesium sulfate, magnesium sulfate heptahydrate, ammonium chloride, potassium phosphate, ammonium formate, sodium chloride, ammonium sulfate, anhydrous sodium sulfate, calcium carbonate, potassium bicarbonate, dihydrate calcium chloride were studied to improve extraction. Anhydrous sodium sulfate provided the best results for all substances. The quantitative factors that significantly affect the extraction were identified using Plackett-Burman design containing 16 experiments and 3 central points. In this way, the amount of sample, the proportion of the extraction solvent mixture, the pH of the water, the amount of water, the amount of salt, the stirring time in both stages and the centrifugation time were optimized. Finally, method was optimized through a central rotational composite design. The developed method was suitable for the extraction of the three pharmaceutical drugs and the method showed to be adequate for the quantification of the three antiemetic pharmaceuticals in complex matrices, as sediment.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo