To cite this paper use one of the standards below:
The detection and processing of NMR signals are somewhat different from other spectroscopy methods. Thus, it is not uncommon that students in general spectroscopy courses have some misconceptions about these topics. Thus, having an experimental apparatus that can be used in the classroom to explain these concepts may be very welcome.
We developed a compact mechanical oscillator to be used as an NMR analog. It is comprised by a vertical spring with two small magnets, fixed in line 10 cm apart, hanging from a rope. The magnet closest to the spring is inserted into a coil that is part of an RLC circuit powered by a DC source connected to an Arduino controlled electronic switch. A current pulse applied to the coil triggers the oscillation of the magnets-spring system at its natural frequency, emulating the application of RF pulses. The magnet oscillation induces a current in the coil, emulating the acquisition of an FID signal. Because the RLC circuit has a resonance frequency and a transient response the increased detection efficiency when the magnet oscillation occurs on resonance with the RLC circuit (tuning of the NMR probe) as well as the dead time effects can be shown.
The second magnet is inserted into a second coil connected to an electronically controlled potentiometer forming a closed circuit. The magnet oscillation induces a current in the coil, generating an opposing magnetic field, which dampens the magnets-spring system oscillation, emulating the NMR signal decay. Furthermore, controlling the potentiometer resistance, decay shapes observed in NMR systems, such as exponential, stretched exponential and Gaussian, can be emulated. A program written in Phyton controls the systems and also allows basic data processing.
Illustrative examples will be shown, and the system will be available for use during the poster presentation.
CNPQ Scholarship, CNPQ (grant 308760/2022-0)
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper