Para citar este trabalho use um dos padrões abaixo:
Acid whey, a dairy industry byproduct rich in lactose, proteins, and minerals, exhibits potential for the development of biopolymer films, contributing to the valorization of co-products. This study aimed to evaluate the effect of incorporating acid whey on the physical, mechanical, barrier, morphological, and antioxidant properties of films formulated with modified corn starch and pectin. The whey was obtained through the coagulation of pasteurized milk at 90 °C via the addition of 0.28% (v/v) of 85% lactic acid. Four formulations were prepared using glycerol as a plasticizer (30% w/w): starch and water (SWa), pectin and water (PWa), starch and whey (SW), and pectin and whey (PW). The solutions were homogenized, heated to 80 °C for 15 min, cooled, degassed by ultrasonication, poured into Teflon dishes, and dried at 50 °C for 24 h. The films were conditioned at 25 °C and 75% relative humidity and evaluated for thickness, tensile strength (MPa), elongation at break (%), elastic modulus (MPa), water vapor permeability (PVA), morphology by scanning electron microscopy, and antioxidant activity using the 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging assay. Quantitative results were subjected to analysis of variance at a 5% significance level (ANOVA). The incorporation of whey increased film thickness from 0.200 to 0.454 mm in the starch matrix and from 0.156 to 0.389 mm in the pectin matrix. It also reduced elongation at break and increased the elastic modulus, indicating stiffer and less deformable materials. The SW formulation exhibited the lowest tensile strength (1.30 MPa), whereas PW presented the highest elastic modulus (41.39 MPa). PW displayed the lowest water vapor transmission rate, while SW showed the highest permeability, demonstrating that these parameters responded differently to film composition and thickness. Micrographs revealed greater irregularity and the presence of aggregates in the whey-containing formulations, suggesting alterations in matrix organization linked to mechanical and barrier performance. Only whey-containing films exhibited antioxidant activity, reaching 41.69% for SW and 21.86% for PW, with SW presenting significantly higher values. This difference suggests that the starch matrix favored the availability of the antioxidant compounds in whey. It is concluded that acid whey imparts antioxidant functionality and alters the structural performance of the films, with SW standing out for its antioxidant activity and PW for its lower WVP. These findings highlight the potential for active packaging applications, although formulation adjustments remain necessary to balance functionality, strength, and flexibility.
Acknowledgements: This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - Brasil (CAPES) - Finance Code 001.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo