Simulation of InSb Nanofoams Induced by Ion Irradiation using the Cellular Potts Model

- 345386
Oral talk
Favorite this paper
How to cite this paper?
Abstract

Semiconductor compounds formed by elements from groups III-IV of the periodic table have been studied over the last few decades. Due to their specific thermoelectric performance, they have enabled a variety of uses in new technologies such as solar cells, vapor and gas detectors, and thermoelectric generators.

Among the various III-IV semiconductors, the binary compounds GaSb and InSb, as well as the ternary (Ga-In)Sb, have shown a remarkable characteristic: they are among the few materials that, when subjected to irradiation with ion beams, undergo a continuous crystalline-porous transformation that ultimately results in a nanometric solid foam. Studies of (Ga-In)Sb thin films using electron microscopy techniques (TEM and SEM), GIXRD, XPS, and ion beam techniques (PIXE, RBS) have yielded significant results, both for formulating models for foam formation and for correlating its dependencies with energy, fluence, and ion beam intensity.

To describe the experimental results, it is necessary to formulate models in terms of fundamental physical quantities such as temperature, electronic structure, band-gap energy, crystalline structure, and energy loss mechanisms in the interaction of ions with matter, especially those occurring in layers very close to the surface of the films (a few nanometers). The use of more common models, especially Molecular Dynamics, has proven impractical due to the very high computational cost. The most recent literature shows some other alternatives, including the CompuCell3D platform.

In this work we present the results of the CompuCell3D simulation for the single crystal InSb thin films deposited by molecular beam epitaxy subsequently irradiated with 17 MeV Au+7 at 1x1014 ions/cm². Our simulation has proved capable of reproducing the formation of the porous structure from the clustering of small pores during irradiation, as well as estimating other parameters for these experimental conditions.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Federal University of Rio Grande do Sul
Track
  • Material Science Analysis Using HRDP Methods
Keywords
InSb nanofoams
cellular Potts model
ion irradiation