INTEGRATED ULTRASOUND-ASSISTED ENZYMATIC BIOREFINERY OF CORN HUSK FOR THE SIMULTANEOUS PRODUCTION OF CELLO-OLIGOSACCHARIDES AND NANOCELLULOSE

- 343089
Pôster
Favoritar este trabalho
Como citar esse trabalho?
Resumo

The valorization of lignocellulosic residues into high-value products is an important strategy for the development of sustainable biorefineries. Corn husk is one of the most abundant agricultural residues generated by the maize industry and represents an attractive renewable feedstock due to its high cellulose content, wide availability, low cost, and underutilization. These characteristics make it a promising raw material for the sustainable production of bio-based materials and functional ingredients. In this context, this study investigated the simultaneous production of cello-oligosaccharides (COS) and cellulose nanocrystalline (NCC) through ultrasound-assisted enzymatic hydrolysis, aiming to establish process conditions capable of directing cellulose conversion toward soluble oligosaccharides or NCC. Dilute acid-pretreated corn husk was characterized and subjected to enzymatic hydrolysis using the commercial cellulase cocktail Celluclast® 1.5 L (Novozymes ®) under high-intensity ultrasound. A Central Composite Rotatable Design (CCRD) was employed to evaluate the effects of sonication time, ultrasound intensity, and enzyme loading on COS production and NCC yield. COS were quantified by High-Performance Anion-Exchange Chromatography with Pulsed Amperometric Detection (HPAE-PAD), while NCCs was characterized by Fourier Transform Infrared Spectroscopy (FTIR), particle size, and X-ray diffraction. The pretreated biomass presented high cellulose content (48.24%), confirming its suitability as a feedstock for bioconversion. The highest COS production (1381.5 mg/L), predominantly composed of C4–C6 oligomers, was achieved using 120 s of sonication, ultrasound intensity of 240 W/cm², and enzyme loading of 20 FPU/g. In contrast, the maximum NCC yield (73.24%) was obtained under 120 s of sonication, 70 W/cm², and 20 FPU/g, demonstrating that modulation of ultrasound intensity effectively directs cellulose conversion toward either soluble oligomers or crystalline nanocellulose. The obtained NCC exhibited an average particle size of approximately 279 nm, high crystallinity (82%), and preserved cellulose chemical structure, confirming the efficiency of the enzymatic-ultrasonic process. These findings demonstrate that ultrasound-assisted enzymatic hydrolysis enables selective modulation of cellulose depolymerization, allowing the coproduction of functional COS and high-quality NCC from a single lignocellulosic feedstock. This integrated strategy provides a sustainable alternative to conventional chemical routes and reinforces the potential of corn husk as a valuable raw material for biorefineries focused on producing multiple high-value biobased products.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Faculdade de Engenharia de Alimentos da Universidade Estadual de Campinas (FEA - UNICAMP)
Eixo Temático
  • 1) Engenharia de Alimentos
Palavras-chave
Enzymatic hydrolysis
Ultrasound;
Bioingredients