To cite this paper use one of the standards below:
The valorization of lignocellulosic residues into high-value products is an important strategy for the development of sustainable biorefineries. Corn husk is one of the most abundant agricultural residues generated by the maize industry and represents an attractive renewable feedstock due to its high cellulose content, wide availability, low cost, and underutilization. These characteristics make it a promising raw material for the sustainable production of bio-based materials and functional ingredients. In this context, this study investigated the simultaneous production of cello-oligosaccharides (COS) and cellulose nanocrystalline (NCC) through ultrasound-assisted enzymatic hydrolysis, aiming to establish process conditions capable of directing cellulose conversion toward soluble oligosaccharides or NCC. Dilute acid-pretreated corn husk was characterized and subjected to enzymatic hydrolysis using the commercial cellulase cocktail Celluclast® 1.5 L (Novozymes ®) under high-intensity ultrasound. A Central Composite Rotatable Design (CCRD) was employed to evaluate the effects of sonication time, ultrasound intensity, and enzyme loading on COS production and NCC yield. COS were quantified by High-Performance Anion-Exchange Chromatography with Pulsed Amperometric Detection (HPAE-PAD), while NCCs was characterized by Fourier Transform Infrared Spectroscopy (FTIR), particle size, and X-ray diffraction. The pretreated biomass presented high cellulose content (48.24%), confirming its suitability as a feedstock for bioconversion. The highest COS production (1381.5 mg/L), predominantly composed of C4–C6 oligomers, was achieved using 120 s of sonication, ultrasound intensity of 240 W/cm², and enzyme loading of 20 FPU/g. In contrast, the maximum NCC yield (73.24%) was obtained under 120 s of sonication, 70 W/cm², and 20 FPU/g, demonstrating that modulation of ultrasound intensity effectively directs cellulose conversion toward either soluble oligomers or crystalline nanocellulose. The obtained NCC exhibited an average particle size of approximately 279 nm, high crystallinity (82%), and preserved cellulose chemical structure, confirming the efficiency of the enzymatic-ultrasonic process. These findings demonstrate that ultrasound-assisted enzymatic hydrolysis enables selective modulation of cellulose depolymerization, allowing the coproduction of functional COS and high-quality NCC from a single lignocellulosic feedstock. This integrated strategy provides a sustainable alternative to conventional chemical routes and reinforces the potential of corn husk as a valuable raw material for biorefineries focused on producing multiple high-value biobased products.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper