Para citar este trabalho use um dos padrões abaixo:
Optimization of Parameters and Methodology for the Synthesis of LTA-Type Zeolite Using Light Coal Ash
Thiago Jackson Torres Cruz
Universidade Federal do Rio Grande do Norte
Agora você poderia compartilhar comigo suas dúvidas, observações e parabenizações
Crie um tópicoThe synthesis of zeolites using waste as a source of Si and Al is well known, and light coal ash has been studied to minimize the problems of waste management and mitigate environmental effects. The residue used in this work was supplied by Coal Workers Assistance Society (SATC) Criciúma–SC/Brazil, and had 24.09% Al2O3 and 54.25% SiO2 in its chemical composition. Synthesis studies using this residue with the objective of obtaining LTAzeolites were carried out by hydrothermal means, alkaline fusion, and the combination of the two methods, varying parameters such as crystallization time, Na/T ratio, OH/ratio, ultrasound exposure, gel agitation temperature, and the alkaline melting temperature of the residue. The results were characterized by X-ray difraction (XRD) techniques and scanning electron microscopy (SEM-FEG). It was possible to obtain 70% crystalline zeolite type LTA for the first time at mild conditions with temperatures below 200 °C by alkaline fusion with smaller amounts of NaOH and short times (2 h). Thus, suitable parameters were determined for future scaling.
Katia Gusmão
Parabéns Thiago, ótimo trabalho!
Quais as aplicações em catálise ou adsorção você está pensando em dar para seus materiais?
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo