To cite this paper use one of the standards below:
Oleogel (or organogel) is a product obtained by mixing an oleogelator, such as vegetable waxes, with vegetable oil. The vegetable oil, which is liquid at room temperature and susceptible to oxidation, is immobilized by the oleogelator, resulting in a solid product, thus offering greater possibilities for application in food processing. The aggregation mechanisms between the gelifying agent and the oil, as well as how this aggregation affects the mobility of the vegetable oil, are still under investigation. Time domain NMR transverse relaxometry time (T2), measured with CPMG pulse sequence, was used to understanding aggregation process and the mechanisms by which each type of agent promotes structuring. The CPMG signals were processed to extract the T2 values and amplitudes with several methods including multi-exponential discrete fitting and the inverse Laplace transform (ILT) (1). In the first method, the T₂ values and their respective amplitudes are obtained, but it requires prior knowledge of the number of T2 components of the signal, which can be a limitation when such information is not available in the literature. The second method, ILT, involves a mathematical operation that generates a T₂ distribution graph, defined based on regularization parameters and the time window in which the operation will be performed. This method is a useful alternative to multi-exponential discrete analysis; however, when the sample exhibits very similar relaxation times, the peaks may overlap into a single peak. Although this can be adjusted through small regularization parameter, it may result in signal artifacts that can be mistaken for real T₂ distributions. An alternative method is the Krylov basis diagonalization method (KBDM) (2). In this method, the signal undergoes a mathematical operation that, unlike ILT, does not involve analyst interference. However, its limitation lies in being more sensitive to noise and more prone to generating artifacts.
In this work, carnauba wax (CW) was used as the oleogelator to structure soybean oil, with oleogel samples prepared at CW concentrations ranging from 0 to 50%. The analyses were performed using a Minispec Mq20 spectrometer (Bruker, Germany), operating at 20 MHz for ¹H, at room temperature.
The variation in T₂ distribution profiles was compared between the ILT and KBDM methods, using ILT as the reference method due to its widespread use. As observed with ILT, the T₂ distributions obtained by KBDM also shifted toward shorter T₂ values, with lower oil concentration, indicating that the network formed by CW interacts strongly with it, likely via Van der Waals interactions.
However, some differences between the two methods were noted: ILT showed a distribution with three T₂ components up to 7% CW, and from 10% onward, a fourth component appeared. In contrast, KBDM suggested that the longer T₂ peaks corresponding to the more mobile components of the triacylglycerols in the oleogels are not single peaks, but rather consist of two distinct T₂ components each. On the other hand, KBDM does not resolve the shorter T₂ components as effectively, due to their lower intensity and higher susceptibility to artifacts, which may lead to misinterpretation of these peaks.
These results indicate that both techniques adequately describe the aggregation between oil and wax. The differences observed suggest that the methods can be used in a complementary manner, as KBDM is more sensitive to closely spaced T₂ values, revealing details that might remain hidden when only ILT is employed to investigate the system.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper