CONFIGURATION AND CALIBRATION OF THE LA-ICP-MS FOR U-Th-Pb AND Lu-Hf ANALYSIS

- 305764
Poster Presentation
Favorite this paper
How to cite this paper?
Abstract

The technique which combines laser ablation (LA), inductively coupled plasma (ICP), and mass spectrometry (MS), is elemental and isotopic analysis performed on solid samples. This technique is used in the U-Th-Pb and Lu-Hf isotopic analyses applied to geochronology and petrogenetic studies.

At  CPGeo, the U-Th-Pb method is applied to zircon, monazite, and titanite minerals. The Lu-Hf method is performed only in zircon.

The mineral to be analyzed is mounted on specific resin-made disks inserted into the laser chamber. After the crystal ablation, the fragments are transported to the ICP-MS, where it is ionized in the argon plasma. Inside the spectrometer, the ionized material is accelerated, and the ions are separated according to their mass-to-charge ratios.

Our laser is an argon fluoride excimer laser with a wavelength of 193 ηm, the repetition rate is: 6 Hz for U-Th-Pb analyses and 7 Hz for Lu-Hf analyses; thefluence at the sample= 8.19 J/cm2; the applied energy = 4.5mJ; beam diameter between 10 and 20 µm for U-Th-Pb and35 and 45μm for Lu-Hf. Helium is the carrier gas in the Helix 2 laser chamber (He flow: MFC1=0.3 L/min, MFC2 = 0.3L/min).The argon fluoride is changed once a week, to keep the ideal voltage condition to operate the laser (max 1.2 Kv).

The ICP-MS is Thermo Scientific's NEPTUNE, operated under the following conditions: radio frequency power = 1200W, Arcool gasflow rate = 16 L/min, auxiliary gas = 1.0 L/min, sample gas flow is between 0.850 and 1.100 L/min; resolution = low.The mass spectrometer is equipped with 9 Faraday cup detectorsbeing 8 mobiles (L1-L4 and H1-H4)and 1 central/fixed axial ion counter (secondaryelectron multiplier–SEMIC1,) and 6 mobile multi-ion counters (MICs – IC2-IC7).

For U-Th-Pb analysis, the MICs are configured to detect signals from 202Hg(IC3), 204(Pb+Hg) (IC4), and 207Pb (IC6), and the Faradays to detect 238U (H4), 232Th (H2), 208Pb (L3)and 206Pb (L4) isotopes.On the other hand, for Lu-Hf analysis all isotopes are detected in Faradays. The analyzed isotopes are 172Yb (L3), 173Yb (L2), 174Yb (L1), 175Lu (C-F),176(Hf+Yb+Lu) (H1), 177Hf (H2), 178Hf (H3), and 180Hf (H4).

Before starting the analyses, Faradays arecalibrated,measuring the analytical baseline and determining the gain for each ion current amplifier, through the gain calibration. A peakcenter scan for 202Hg is measuredformass calibration and to center the ion beams into the detector.

For U-Th-Pb analysis, to see all masses on all cups in the peakscan, a “dummy mass” is added on the center cup (IC1), at an approximate value of 219. Often is necessary to try different values to obtain the scanned peaks of all masses well centralized. For Lu-Hf analysis a peak center for 176(Hf+Yb+Lu) isotope must be performed.

 

Reference: Sato K, Basei M.A.S, Siga Junior O, Onoe A.T, Walter M. Sproesser, Solange L. 2017. Princípio De Espectrometria De Massas: LA-ICP-MS Com Aplicação Voltada À Geocronologia E Geoquímica Isotópica - Geoscience Institute of the University of São Paulo. Geologia USP, Workshop de Espectrometriade MassasInorgânicas.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Institute of Geosciences - IGc, USP
Track
  • 9. 60 Years of the Centro de Pesquisas em Geocronologia e Geoquímica Isotópica - CPGeo
Keywords
LA-ICP-MS
U-Th-Pb
Lu-Hf
Isotopic analyses and Geochronology
Configuration and Geochronology