Characterization of the interaction between the laser beam and the mineral Zirconite: implications for the applications of Laser Ablation in geochronology.

- 305833
Poster Presentation
Favorite this paper
How to cite this paper?
Abstract

Laser ablation comprises the process in which an intense burst of energy, coming from a short laser pulse, is used to remove and volatilize a small portion of a certain material. This technique provides direct analysis of solids without the need for chemical processes for dissolution, reducing the possibilities of contamination or sample loss.

 

On the other hand, this technique suffers from non-stoichiometric effects, which occur during sampling, aerosol transport, vaporization, atomization and ionization, described as elemental and isotopic fractionation. The phenomenon of laser/material interaction coherent with the physical properties of the matrix used has been a limitation for high-precision quantitative analyses.

 

The transfer of laser pulse energy can result in the breaking of the crystal lattices and the resulting thermal effect can influence the fusion efficiency. During the heating process, the crystals inevitably absorb energy and part of this energy will be converted into heat, leading to an increase in temperature in the crystals, enabling the material to phase change if the material temperature exceeds the melting point. Melting followed by solidification will change the atomic structure of materials and can result in transformation from crystalline to amorphous state.

 

The results reported here on laser-matter interaction can fill the gap between practical problems and applications of lasers in geological materials (Mud Tank and Peixe), since this technique has proven to be important in geochronological studies. In this sense, this investigation aimed to characterize and measure isotopic fractionation in mass spectrometer analyzes through the application of reference materials (and to develop quantitative techniques and correction factors to minimize fractionation). For these porpose the investigation promove variations on Ar gas flux, He flux, laser pulse and crater size.

 

The auxiliary gas flow consists of Argon and is responsible for generating and stabilizing the plasma. Despite the large variation imposed on the flow of this gas, it is observed that there is no evidence of signal loss, significant increase in error, standard deviation or 176Hf/177Hf isotopic ratio change.

 

The sample transport gas flow is made up of Helium, responsible for carrying the analytical material from the laser to the plasma, containing the ablated geological material. It is observed that there is a correlation between the increase in the volume of the sampling gas and the increase in the signal of the masses analyzed, so that there is great stability in the isotopic ratios between values 1.050 and 1.100 and great variation between 0.950 and 1.000. There is a tendency towards coherence in the value of the 176Hf/177Hf isotopic ratio, with certified values when He flux values range from 1,050 and 1,150 for the reference material Mud Tank and 1,000 to 1,075 for Peixe;

 

In addition, an increase in signal stability and greater accuracy in isotopic ratios is observed, with a decrease in errors and standard deviations proportional to the increase in the crater size; the minimum size, with ages within the expected range, was 30 µm for the Mud Tank and 50 µm for the Peixe.

 

It is observed that lower laser beam frequencies provide more stable signals; there is a correlation between the increase in frequency and the increase in the isotope signal for the isotopic ratio 176Hf/177Hf. This ratio is more consistent with the certified values when frequency values are between 2 and 10 Hz for Mud Tank and between 5 and 11 Hz for Peixe. As conclusions, a considerable isotopic fractionation was observed in the variation of the sample gas parameter and the frequency parameter. These conditions generate the need to modify the ablation parameters, such as: variation in energy and laser fluence, as well as the flow rate of the carrier gas (Helium) to optimize the isotopic results applied to geochronology.

Share your ideas or questions with the authors!

Did you know that the greatest stimulus in scientific and cultural development is curiosity? Leave your questions or suggestions to the author!

Sign in to interact

Have a question or suggestion? Share your feedback with the authors!

Institutions
  • 1 Universidade do Estado do Rio de Janeiro, UERJ
  • 2 Universidade do Estado do Rio de Janeiro
  • 3 UERJ
Track
  • 8. Isotopes in Magmatic Systems: Crust-mantle Dynamics
Keywords
Application of U-Pb and Lu-Hf Geochronology in zircon
Geochronology
Standartization
laser ablation (LA)
LA ICP MS