This paper was published through Galoá and has a deposited DOI. To cite this paper, use one of the standards below:
In case you are one of the co-authors and want to register this paper in your Lattes, use the following code: doi > 10.17648/sobena-2024-195585
If you've NEVER registered a DOI in your Lattes, check our tutorial!The contemporary shift towards ecological sustainability is witnessing a remarkable upsurge in the harnessing of wind energy, driven notably by the exponential growth of offshore wind turbines. These turbines, leveraging the consistent and robust offshore winds, hold significant promise for advancing the global goals to reach carbon neutrality. Plans have been established for offshore wind to offer substantial renewable energy on a large scale across every continent worldwide, except Antarctica. According to the World Energy Transitions Outlook 2023 report, the world must install nearly 500 gigawatts (GW) of offshore wind by 2030 to meet the climate goals.
However, amidst this progress, the design and construction of wind turbine towers pose a challenge: how to mitigate intrusiveness on the primary structure to avert stress concentrations that could compromise the tower's fatigue life. Traditional methods involving welding studs have been the norm, but they come with their drawbacks, including increased steel thickness and consequent carbon footprint. Addressing this challenge, there is a growing interest in non-intrusive structural fastening techniques through the adoption of alternatives such as magnets or compression rings.
Drawing upon its extensive expertise in adhesive bonded fasteners, particularly in industries like oil and gas and nuclear, COLD PAD has pioneered an innovative solution tailored for wind turbine towers: the S300 bonded mechanical fasteners. These fasteners, engineered to provide robust anchor points with a design capacity of 3kN, offer a viable alternative not only to conventional intrusive methods but also to other non-intrusive methods such as magnets which rely on rare earth materials. The bonded fasteners are free from such elements contributing to resource sustainability. Through rigorous quasi-static mechanical testing, the mechanical performance of these fasteners has been evaluated, adhering to regulatory standards such as the Load and Resistance Factor Design (LRFD) approach outlined in the DNV-ST-C501 standard.
Comprising a stainless-steel dish and a threaded rod bonded onto steel substrates using a methacrylate adhesive, these patented mechanical fasteners have undergone stringent testing to validate their capacity and reliability. Various failure mechanisms, including bondline and fastener component failures, have been examined with tests conducted under different load conditions and temperatures. The results, that will be detailed in the article, demonstrate the robustness of the fasteners, with a safety factor exceeding 6 across a range of environmental variables. To ensure seamless and quick installation across diverse environments a specialized industrial installation tool has also been developed.
Beyond their technical prowess, these bonded mechanical fasteners offer compelling advantages over traditional methods. They facilitate structural fastening without compromising the tower's integrity or longevity, thereby enabling significant reductions in steel thickness and corresponding CO2 emissions. Estimates suggest potential steel thickness savings of up to 13% per tower, further bolstering their appeal from both ecological and economic standpoints not only for the wind tower itself but also for the floating structure if any. Notably, the environmental impact of these fasteners is mitigated by their ability to be removed without residual constraints and recycled, aligning with broader sustainability objectives.
With nearly 200,000 papers published, Galoá empowers scholars to share and discover cutting-edge research through our streamlined and accessible academic publishing platform.
Learn more about our products:
This proceedings is identified by a DOI , for use in citations or bibliographic references. Attention: this is not a DOI for the paper and as such cannot be used in Lattes to identify a particular work.
Check the link "How to cite" in the paper's page, to see how to properly cite the paper