Técnicas de Inspeção de Sistemas Submarinos - Uma Visão Geral Para Uma Implementação Ideal de Inspeção Baseada em Risco (IBR)

Favoritar este trabalho
Como citar esse trabalho?
Detalhes
  • Tipo de apresentação: Comunicação Oral
  • Eixo temático: 3.Estruturas navais e offshore
  • Palavras chaves: Inspection; flexible pipe; state of art;
  • 1 Universidade Federal do Rio de Janeiro
  • 2 ENAUTA

Técnicas de Inspeção de Sistemas Submarinos - Uma Visão Geral Para Uma Implementação Ideal de Inspeção Baseada em Risco (IBR)

Ana Paula França de Souza

Universidade Federal do Rio de Janeiro

Resumo

The Brazilian National Agency of Petroleum, Natural Gas and Biofuels (ANP) technical regulations, such as RT SGSS (Technical Regulation of the Subsea Systems Operational Safety Management System) and RT SGIP (Technical Regulation of the Well Integrity Management System) establishes that the operators shall carry out analysis of qualitative risks, semi-quantitative or quantitative according to the estimated level of risk, complexity, size, stage of life cycle and experience in similar Subsea systems throughout the life cycle.
The RT SGSS regulation states that the risk analysis must consider the different phases of the equipment's life cycle, identifying possible failure modes. Despite defining the minimum practices to be adopted by operators, the regulation does not establish which methodologies or techniques should be adopted and how to adapt them to the different subsea equipment of the subsea oil field arrangement.
In this context, the Risk-Based Inspection (RBI) methodology provides a solution to assess the risk and define the inspection intervals, evaluating different techniques available on the market, looking for which are most suitable for each typical subsea equipment.
Risk-based Inspection planning aims to allow the operation of the subsea system and well system within safety limits and to ensure the assessment of its structural integrity minimizing the risk of failure, aiming to answer five fundamental questions:
- What to inspect?
- Where to inspect?
- When and how to inspect? and
- What is the financial cost of the inspection?
Regarding the question “When and how to inspect?”, It can be said that the shorter the interval between inspections and the adoption of different technologies, the greater the probability of detecting an inspection non-conformity (INC) and the lower the probability of failure occurrence.
However, if the inspection interval is too short, the inspection cost will be extremely high. On the other hand, if the inspection interval is too long, an NCI may not be detected and the greater the probability of failure. In this way, it is necessary to determine an optimized time interval that maintains the desired level of risk and minimizes the cost of inspection and selects the appropriate technology for the type of INC that the system may present.
In order to provide information for the evaluation and choice of the inspection technology to be adopted, “how to inspect”, this work presents a state of the art of the usual and advanced inspection technologies, with prototypes already tested, developed for flexible pipes and well systems.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!