Para citar este trabalho use um dos padrões abaixo:
Use of green techniques to convert native starches into nanoparticles is an interesting approach to producing stabilizers for Pickering emulsions considering the growing consumer demand for clean label and sustainable products. This study evaluated the stabilizing effect of cassava starch nanoparticles (SNP) produced by nanoprecipitation at different concentrations (1.0, 2.0, 3.0 and 3.5% w/w), as well as the influence of ultrasound emulsification time (3, 6, and 9 min) on Pickering emulsions. Emulsions were evaluated by monitoring the creaming index, optical microscopy, size distribution and mean droplet size (D32) after 7 days of storage. Creaming index decreased with the increase of SNP concentration, with the lowest creaming index values observed for SNP concentrations of 3.0 and 3.5% (w/w). However, the lowest D32 values of fresh emulsions were observed at the lowest concentration of SNP (1.0 and 2.0% w/w). Longer emulsification time also decreased the creaming index and led to smaller droplet sizes with low polydispersity, although bridging flocculation was observed. Despite flocculation, emulsions produced with 6 and 9 min of ultrasound emulsification showed little variation in droplet size after 7 days of storage, indicating greater stability against coalescence. These results may be related to the effects of cavitation, promoting disaggregation or particle size reduction for a better adsorption of SNP on the interface. Therefore, the results show the potential to use an alternative green method for producing starch nanoparticles to stabilize Pickering emulsions against coalescence.
Com ~200 mil publicações revisadas por pesquisadores do mundo todo, o Galoá impulsiona cientistas na descoberta de pesquisas de ponta por meio de nossa plataforma indexada.
Confira nossos produtos e como podemos ajudá-lo a dar mais alcance para sua pesquisa:
Esse proceedings é identificado por um DOI , para usar em citações ou referências bibliográficas. Atenção: este não é um DOI para o jornal e, como tal, não pode ser usado em Lattes para identificar um trabalho específico.
Verifique o link "Como citar" na página do trabalho, para ver como citar corretamente o artigo