INFLUENCE OF IMPELLER BLADE GEOMETRY ON OXYGEN TRANSFER, POWER CONSUMPTION AND MIXING TIME IN A STIRRED TANK BIOREACTOR

- 106767
Oral
Favoritar este trabalho
Como citar esse trabalho?
Resumo

The conventional bioreactor using Impeller type Rushton is the most employed of all bioreactors at all production ranges, especially in aerobic cultures where aeration and agitation are essential to supply the demand for oxygen by microorganisms. In order to ensure adequate hydrodynamic conditions, which maximize the oxygen transfer, minimizing the consumption energy and mixing time, this work evaluated the performance of two types of impellers – commercial Rushton (RT) and a 3D printed Rushton with modified blades (MRT) - with respect to kLa, power consumed and mixing time in differents aeration and rotation. The values of kLa under the same conditions did not change significantly, however when using the MRT impeller a constancy in power consumption was observed when comparing the aerated with the non-aerated system. The results indicate that the MRT blade geometry is the most efficient to mixing time in non-aerated systems, coming to be 26.5% lower at 100 rpm. Therefore, in the range of rotation and aeration studied, MRT is economically advantageous, since it provides similar results with low manufacturing cost.

Compartilhe suas ideias ou dúvidas com os autores!

Sabia que o maior estímulo no desenvolvimento científico e cultural é a curiosidade? Deixe seus questionamentos ou sugestões para o autor!

Faça login para interagir

Tem uma dúvida ou sugestão? Compartilhe seu feedback com os autores!

Instituições
  • 1 Departamento de Bioprocessos e Biotecnologia / Faculdade de Ciências Farmacêuticas / Universidade Estadual Paulista “Júlio de Mesquita Filho”
  • 2 Engenharia de Materiais e Bioprocessos / Engenharia Química / Universidade Estadural de Campinas
Eixo Temático
  • 4. Modelagem, Instrumentação e Controle de Bioprocessos
Palavras-chave
stirred tank bioreactor
kLA
mixing time
Power Consumption